Swiwin turbojet engine logo
Bad boyz RC turbojet engine experts logo
0
Categories
Super Viper Foam Turbine Navy PNP
+3

Super Viper Foam Turbine Navy PNP

00045
$1,399.99
In stock
1
Product Details

SPECIFICATIONS:

Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight 6.5kg (14.3 lb)
Turbine Engine SW60 6KG brushed / SW60B 6KG brushless (required & not included)
Cruising speed 250 km/h
Flying time 6 min (avg)
Wing area 34.28 dm 2
Wing load 189.6 g/dm 2
Main material 20 times EPO
Painting surface matte paint
Suitable experience level Intermediate
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃～40℃
Radio System 8 channel (required & not included)
Control System MFC-2085
Servos

25g×2 Metal gear with 480mm lead (left & right ailerons forward)
25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1 forward)
25g×2 Metal gear with 80mm lead (elevator forward)
12g×1 Metal gear with 300mm lead (Nose wheel steering forward)
12g×1 Metal gear (360°lock Hatch cover forward)
Recommended Battery 2S,7.4V,1800～2000mAh ×2 ,LiPo with T type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator(Horizontal tail) Yes
Rudder(Vertical tail) Yes
The smoke system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro not included
Packaging / Size Packing Box + Outer Box(Card mark)/132.5×46×39.5(cm)
CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
  • Fuselage ×1
  • Left Wing ×1
  • Right Wing ×1
  • Left Horizontal Stabilizer ×1
  • Right Horizontal Stabilizer ×1
  • Vertical Stabilizer ×1
  • Nose ×1
  • Cockpit canopy ×1
  • Main wing carbon tube L=598mm external diameter 16mm×1
  • Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
  • Sticker ×1
  • Capping board ×1
  • Accessories Bag 1 ×1
    • Nylon rocker arm of the servo ×2
    • Double sided sponge paper ×1
    • Screw (HM4 × 35mm) ×4 (Nose)
    • Screw (HM3 × 14mm) ×2 (Wing)
    • Screw (HM3 × 10mm) ×2 (Wing)
    • Screw (PA3 × 14mm) ×4 (Engine)
    • Screw (PA3 × 10mm) ×4 (Tail nozzle)
    • Screw (PA3 × 8mm) ×8 (Horizontal Stabilizer/Vertical Stabilizer)
  • Accessories Bag 2 ×1
    • L type 3mm inner six corner board hand ×1
    • Screw (HM4 × 35mm) ×4 (Nose)
    • Screw (HM3 × 14mm) ×2 (Wing)
    • Screw (HM3 × 10mm) ×2 (Wing)
    • Screw (PA3 × 14mm) ×4 (Engine)
    • Screw (PA3 × 8mm) ×8 (Horizontal Stabilizer/Vertical Stabilizer)
  • Manual ×1

REQUIRES:
  • SW60 6KG brushed / SW60B 6KG brushless (required & not included)
  • 8 channel radio system(radio & receiver) (required & not included)
  • 2S,7.4V,1800～2000mAh ×2 ,LiPo with T type plug (required & not included)
  • LiPo battery charger (required & not included)
Save this product for later
Share by: