Swiwin turbojet engine logo
Bad boyz RC turbojet engine experts logo
0

Categories

HSD T-33 Turbine Thunderbirds

00044
$1,549.00
In stock
1
Product Details
Wingspan 2018 mm (79.4 in)
Length 1800 mm (70.9 in)
Flying Weight 10.7kg (23.5 lb) with 1800cc Aviation kerosene
Turbine Engine SW80B 8KG brushless (required & not included)
Cruising speed 150~200 km/h
Flying time 3~5 mins (full throttle)
Wing area 56.5 dm 2
Wing load 184.1 g/dm 2
Main material 20 times EPO
Painting surface matte paint
Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 7 channel (required & not included)
Control System MFC-2085
Servos

7.4V 25g×2 Metal gear with 480mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 230mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (elevator×2 & rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)

Recommended Battery 2S,7.4V,5200mAh ×2 ,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator(Horizontal tail) Yes
Rudder(Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/52.56×21.3×16.9(inch)
CG (Center of Gravity) 180mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)



PACKAGE INCLUDES:

  • Fuselage ×1 pcs
  • Left main wing ×1 pcs
  • Right main wing ×1 pcs
  • Left Horizontal tail ×1 pcs
  • Right Horizontal tail ×1 pcs
  • Vertical tail ×1 pcs
  • Nose ×1 pcs
  • Cockpit ×1 pcs
  • Left auxiliary tank ×1 pcs
  • Right auxiliary tank ×1 pcs
  • 1# Main wing carbon tube L=820mm external diameter 16mm×1 pcs
  • 2# Main wing carbon tube L=760mm external diameter 10mm×1 pcs
  • Horizontal Stabilizer carbon tube L=650mm external diameter 6mm×1 pcs
  • Accessories Bag 1 ×1 pcs
    • Screw (HM3 × 10mm) ×8 pcs (Horizontal tail)
    • Screw (HA3 × 10mm) ×8 pcs (Vertical tail / Tail nozzle)
    • Screw (HA3 × 14mm) ×8 pcs (Engine)
    • Screw (HM3 × 14mm) ×8 pcs (Wing)
    • Screw (HM4 × 25mm) ×8 pcs (Auxiliary tank)
    • Screw (PWM6 × 70mm) ×6 pcs (Nose)
  • Accessories Bag 2 ×1 pcs
    • 100mm signal line(JR male+JR male) ×8 pcs
  • Manual ×1 pcs

REQUIRES:
  • SW80B 8KG brushless (required & not included)
  • 7 channel radio system(radio & receiver) (required & not included)
  • 2S,7.4V,5200mAh ×2 ,LiPo with XT60 type plug (required & not included)
  • LiPo battery charger (required & not included)
Save this product for later
Share by: